Save Settings Reset

Brandywine!" font

SCRIPTORIUM FONT LIBRARY MINI-MANUAL EXTRACTION Our fonts come with the files stuffed in a single archive file using Stuffit for the Macintosh or PKunZip for the PC. To extract Stuffit archives, just click on them and they will unstuff to the destination you specify. To extract PKZip archives you will need a copy of PKunZip. If you don't have a current copy you can obtain one from almost any local bulletin board or online service, or from our BBS at 512/472-6905. INSTALLATION Macintosh: If you are using System 7 all you need to do is drop the fonts you wish to use on your system folder and they will automatically be placed in the Font folder. If you are using an older version of the system software you will need to drop the fonts on the system file itself. Before installing fonts determine whether you wish to use True Type or Postscript. For Postscript install the .bmap file and the file with no suffix. For Trutype just install the .suit file. Do not install both Postscript and Truetype unless you rename one of the suitcases so that they will not conflict. MS DOS: Where you install the fonts will depend on the program you are using. Consult your manual for more information. Windows: Click on the Control Panel icon. In the Control Panel click on Fonts icon. Select add fonts. In some cases you may need to also add the fonts specifically to the programs you are using. Consult the program manual for more information. TROUBLESHOOTING Font Appears as Boxes (Macintosh): First, check to make sure that none of the characters display properly. Some calligraphic, display and decorative initials fonts may have only upper or lower case characters, but not both. This is not a defect, but a traditional characteristic of those types of alphabets. This is an indication that the font is too complex for the memory configuration which you are currently using. This is most likely to happen when using the Postscript versions under system 6.X, on a 68000 Macintosh, or on a system with less than 4 megabytes of system memory. However, with more complex fonts it can occur with more powerful systems. It can also be the result of programs which have poor memory management. In some cases assigning additional memory to the application you are using can solve this problem, but the more complex the font is, the more memory it demands. We have never encountered any problems on any systems which have a 68030 or better processor and at least 8 megabytes of memory, but some of the newer Macintoshes, although nominally equivalent to an SE/30 or better, have inexplicably poor memory management. In the worst case scenario your system just may not be able to run some of the most complex fonts without some sort of hardware or software upgrade. Font Not Visible on Screen or Appears Only in Small Point Sizes (PC): This is essentially the same problem as the one noted above on the Macintosh. It means that your system is not powerful enough to handle the number of points in the font you're trying to use. This problem is particularly troublesome with PCs running Windows, but it will be fixed with the release of Windows95. This generally occurs with art and decorative initials fonts, but the limitations on the PC are even more severe than on the Macintosh, so on older systems it may occur with less complex fonts as well. It is less likely to happen with TrueType fonts than with Postscript, and can only be dealt with by getting a more powerful PC. Generally a 486 or better with at least 8 megabytes of memory should have no problems. If you cannot upgrade your hardware you may find that you can still use the more complex fonts in a limited context. Generally you should be able to use smaller point sizes with multiple characters, or print one or two individual characters in larger point sizes, even if they don't appear on the screen. Font Appears Not to Have Apostrophes: This is a quirk of certain word processing programs which can be configured to use a non-standard apostrophe character in place of the standard apostrophe included in all our fonts. Some programs, including Microsoft Word may come configured to use the alternative apostrophes. Consult your manual to reconfigure the software, or for the key combination necessary to access the correct apostrophe. Font Prints with Rays or Lines on it: Generally a problem with Postscript versions of the most complex fonts and certain art or font sampling programs. Not much you can do except try a different program. Font Prints Only Some Lines of Some Characters (PC): This is another function of PCs with insufficient memory, generally only with those fonts with many overlapping points, particularly decorative initials. This may be fixable by changing the settings on your printer (see printer manual). Alternatively it should not be a problem if you print only a few characters at a time, which is normal use for this type of font anyway.

AAAaaa
Brandywine!" Regular
<style type="text/css">
@font-face{
    font-family:"brandywine";
    src:url("https://candyfonts.com/wp-data/2019/03/12/32849/brandywi.ttf") format("woff"),
    url("https://candyfonts.com/wp-data/2019/03/12/32849/brandywi.ttf") format("opentype"),
    url("https://candyfonts.com/wp-data/2019/03/12/32849/brandywi.ttf") format("truetype");
}
htm_tag{font-family:"brandywine";font-size:px;text-transform:;color:#}
</style>

CHARACTER MAP [68]